Saturday, December 3, 2016

SONY KDL-32 37 40 46 KDL-55EX720 EX721 EX723 EX724 EX725 EX726 EX727 EX728 EX729 CHASSIS AZ2F blink codes

SONY KDL-32 37 40 46 KDL-55EX720

EX721 

EX723 

EX724

EX725

EX726

EX727

EX728 

EX729 

CHASSIS AZ2F


Blink Code



Saturday, November 5, 2016

Sony EX330 EX430 EX33 EX43 Blink Codes

 Blink Codes For

KLV-32EX330 
KLV-32EX33A
KLV-32EX33B
KLV-40EX430 
KLV-40EX43A
KLV-40EX43B









Tuesday, September 6, 2016

Sony 22 26 32 ex 550 blink codes


 Sony 22 26 32 ex 550 blink codes
 Sony 22 26 32 ex 553 blink codes
 Sony 22 26 32 ex 555 blink codes








Tuesday, August 23, 2016

Micromax LCD/LED Factory Mode



Micromax LCD/LED Factory Mode




The TV has 3 types of Service Modes

1) Design Menu - Can access all other modes through this - Access to Overscan and other settings
Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 1, 9, 5 and 0 in series, Design Menu will appear in the left top of screen

2) Factory Menu - Access to color calibration & WB settings
Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9, 7, 3 and 5 in series, Factory Menu will appear in the left top of screen

3) Service Menu - Random stuff
Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9, 7, 0 and 5 in series, Service Menu will appear in the left top of screen

Tuesday, July 12, 2016

TOSHIBA LCD TV SERVICE MODE

Image

Press MUTE button twice on Remote Control.
Press MUTE button again and  keep pressing.
While pressing the MUTE button, press MENU button on TV set.
DISPLAYING THE ADJUSTMENT MENU
Press MENU button on Remote Control.
Service mode <–> Adjustment mode [Toggles]
KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Test signal selection : TV/VIDEO button (on Remote)
Selection of the adjustment items : Channel UP / DN (on TV or Remote)
Change of the data value : Volume LEFT / RIGHT (on TV) or UP / DN (on Remote)
Adjustment menu mode ON/OFF : MENU button (on Remote)
Initialization of the memory : CALL + Channel button on TV [UP]
Reset the count of operating protect circuit to “00” : CALL + Channel button on TV [DN]
“RCUT” selection : 1 button
“GCUT” selection : 2 button
“BCUT” selection : 3 button
“CNTX” selection : 4 button
“COLC” selection : 5 button      —–  Color thickness correction
  “UVTT” selection : 6 button       note: Displayed differently as shown below, depending
                                                       on the setting of the receiving color system.  COLP (PAL); COLC (NTSC); COLS (SECAM)
Automatic A/D Adjustment(PC, Component) : 7 button
Self diagnostic display ON/OFF : 9 button.
CAUTION : Never try to perform initialization unless you have changed the memory IC.

Panasonic THL-32C32X Blink Codes

   Panasonic THL-32C10X Blinks
  • Turned on the green light had been blazing flame ...... backlight ... .panel Vcc already on ...... blue LED indicator located on the M / B has also been flame ... ..but not until appear OSD direct air die protectionism with 14x blinking.
image



According Service Manual this model 
image


Friday, June 17, 2016

Philips Service Mode/ Factory Mode

Philips Service Mode/ Factory Mode
Philips LCD, LED Service Mode/ Factory Mode


Philips Service Mode for Philips Lcd 32 and 42 inch.
step 1. Press Menu.
step 2. press 062596 menu.
step 3. press Menu again.
step 4. press upper ^ ARROW BUTTON(once).
step 5. press right > arrow button(oncer).
Here is your service Mode

Friday, January 29, 2016

Sunday, January 10, 2016