LCD REPAIR: 2015

Thursday, December 31, 2015

SAMSUNG LA-22 26 32-C450E1 Service manual

LCD-TV Chassis : N88A
Model : LA22C450E1 LA26C450E1 LA32C450E1

SAMSUNG LA-22 26 32-C450E1

Download Here

or

https://www.dropbox.com/s/dewwc5u7xho2e4g/samsung_la-22_26_32-c450e1.pdf?dl=1

Tuesday, December 29, 2015

Chinese And Many More LCD Factory mode/Service Mode

COBY
Enter menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580

Dynex
Source/Input 2580
Hold Vol down on TV and hold the (#1) button on remote

Element
Menu 0000 > menu 1147

Haier
Pull up menu, Hi-Lite “audio” then enter 8893.

Hisense
“Parental ” enter 0000 then select
“Clean All ”

Insignia
Input 2580 (TV is on)

LG / Zenith
Hold MENU on TV and MENU on remote for 5 to 10 seconds,

Mitsubishi
Menu 123 or Menu 2470 (TV is on)

NEC
While powering ON, hold "MENU" or "INPUT" on TV,

Panasonic
Hold [ VOL-- ] on TV, press and hold menu button on remote.

Philips
Push Menu , select 062596

Polaroid
Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+]
(TV is on)

Proscan
In customer menu go to setup, select parental control menu,
enter 0000 then select “clear channel list”.

RCA
Menu 1147

Sanyo
Hold VOL Down on TV, press and hold #1 button on remote,
VOL will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.

Samsung
Mute 182 power

Samsung (European)
Power off, Info - Menu - Mute - Power,

Seiki
Menu 0000

Sharp
Menu, 1999
Menu, 3481
Menu, 1147
While holding [ VOL– & INPUT ] buttons on TV plug in set when
“K ” appears push (VOL– & CHANNEL-)

Sony
Hold “arrow up” on Remote and push power button on TV (TV
is ON)

Symphony
Source/input 2580

Toshiba
On Menu, select “Installation”, then “ System Information” press
the right arrow button.
(“System Information” will change to “Factory Reset” or
something similar)

Vestel
Menu 4725 then select "RESET"

Vision Quest
Source / Input 2580

Vizio
menu under “Help” tab is Factory Default enter
0000

Haier LCD
1. Press “MENU/EXIT”;
2. Press”1”+”9” +”9” +”9”;
3. Press “OK”

Panasonic
While pressing [VOLUME ( - )] button of the main unit,
press [INFO] button of the remote control three times
within 2 seconmo

AOC
TV mode adjust volume to zero, press mute key
and press number key 9 8 7 6 .

Beko - LCD TV Service Menu Menu- 9, 3, 0, 1
(1)China lcd
menu Press SLEEP→PIC→DSP→MENU button on the remote

(2)Press MENU => Q.VIEW => MUTE to enter
(3) "PRESET"."Ch ,press 2483

Haier LCD HL40XP1 TV Service
Press Menu button, press the key 8893, and Press “OK”
Haier HTR20 20" CRT TV
Press MENU buton on TV pannel andMENU buton on remote control at the same time

Philips Service Mode
remote control an key sequence 0 6 2 5 9 6
by pressing the 'MENU' button.

samsung LCD remote control, press
INFO, MENU, MUTE, POWER ON

Sanyo LCD- Service mode
menu => press “INPUT”, “2”, “5”, ”8” and “0”

Sharp Service Mode Press and hold buttons VOL- and
PR+ on the local keyboard

Singer Service Menu
press the sequence on the remote control: 1, MUTE,
RECALL, MUTE. 1, MUTE, DISPLAY MUTE

Thomson Service Menu
Standby. Switch off with the mains switch. Press and hold
'Program down ' and 'Volume down' and then switch on

SONY Service mode
sequence DISPLAY, 5, VOL +,
POWER.

DISPLAY (info), 5, volume +, TV (Power)

Onida
Press display and VSM

Friday, December 4, 2015

All LCD Service Mode Factory Mode

All LCD Service Mode Factory Mode

Wednesday, December 2, 2015

Sony Klv 32 37s310 Service Manual

Sony Klv 32 37s310 Service Manual

For

Sony Klv 32s310
Sony Klv 37s310

Please Download PDF From Below Link

https://www.dropbox.com/s/lmqtdf1gs5pjuh1/sony_klv32-37s310a_ch_wax3.pdf?dl=1

or

Download Here

Saturday, November 28, 2015

Panasonic th 42x20 Blink Code

Panasonic th 42x20 Blink Code

for

TX-P42X20B
TX-P42X20D
TX-P42X20E
TX-P42X20L
TX-P42X25E
TX-P42X25ES
TX-PF42X20

Enter IN Service Mode:

Friday, November 27, 2015

Sony Klv-32ex320 Service Mannual

Service Manual for

Sony klv-32ex330
Sony klv-32ex330a
Sony klv-32ex330b
Sony klv-41ex430
Sony klv-41ex430a
Sony klv-41ex430b

Please Download From Below Link

https://www.dropbox.com/s/ul0gus72eqnzy6b/sony_kdl-32ex600_kdl-40ex600_kdl46ex600_chassis_az1-k.pdf?dl=

or

Download Here

Sony Software for bx300,ex300,,ex400,ex500,nx500

Applicable Models

KLV-22BX300,

KLV-22EX300,

KLV-26BX300,

KLV-26EX300,

KLV-32BX300,

KLV-32EX300,

KLV-32EX400,

KLV-32EX500,

KLV-32NX500,

KLV-40BX400,

KLV-40EX400,

KLV-40EX500,

KLV-40NX500,

KLV-46EX400

Updation process:

Download and Transfer the Update File to Your USB Storage Device

Download the sony_tvupdate_2010_1539_ga_atv.pkg file to a temporary or download directory (please note this directory for reference) on your computer.
Go to the directory where the file was downloaded and verify that the size of thesony_tvupdate_2010_1539_ga_atv.pkg file is 47,733,217 bytes.

a. Right-click the sony_tvupdate_2010_1539_ga_atv.pkg file, and click "Properties".
b.. On the "sony_tvupdate_2010_1539_ga_atv.pkg Properties" screen, verify that the "Size:" listed is "45.5 MB (47,733,217 bytes)".
Note: The "Size on disk:" listed may be different. That is normal.
c. If the file size is different than the "47,733,217 bytes", please download thesony_tvupdate_2010_1539_ga_atv.pkg file again.
Format a compatible USB storage device to the FAT32 file system and connect it to your computer. View formatting instructions and the list of compatible USB storage devices.
Transfer the sony_tvupdate_2010_1539_ga_atv.pkg file to the USB storage device:

For Windows® XP operating system: Go to the directory where the file was stored, right-click thesony_tvupdate_2010_1539_ga_atv.pkg file and, from the menu, click "Send To...", and then click the drive (E.g. Removable Disk E:) that represents your USB device. The file will be copied onto your USB device.

For Macintosh® OS X operating system: Drag and drop the sony_tvupdate_2010_1539_ga_atv.pkg file to the root folder of the USB device.

Note: The update will not be performed if the name of the file is modified.
Remove the USB device from your computer.
Please continue to the next section.

Updating the Software
Note: The software update takes approximately 10 minutes to complete. During the update process, the screen on your BRAVIA television will display progress information, or may be blank. This is normal. Please do not remove the USB storage device until the update is complete.

WARNING! Do not turn off the TV set or disconnect it from the power supply during the update process. Doing so may damage your TV set and make it unusable, or may require service.

WARNING! Do not press any button, except as instructed, until the update is complete. Doing so may damage your TV set and make it unusable, or may require service.

Power on the TV.
Insert the USB storage device into the USB port located on the side of the TV.
Turn off the TV by pressing the POWER button on the TV set.
Press the POWER button again.
The POWER indicator will be green for 30 seconds, followed by the PIC OFF/TIMER indicator slowly flashing amber, and the STANDBY indicator is red.
After several minutes, the TV will turn off and then turn back on to complete the update.
CAUTION: During the firmware installation process, do not remove the USB device, or switch off the TV set or remove the power.
Safely remove your USB device from the USB slot. The update process is now complete.

Download from below link

http://tv.update.sony.net/swdl/ond/2010/as/in/F18194300_PS031829/sony_tvupdate_2010_1539_ga_atv.pkg

Software for above Models

Wednesday, November 25, 2015

Sony KLV 26,32,40,46V300a Blink Codes

Sony KLV 26,32,40,46V300a Blink Codes

KLV-26V300A
KLV-40V300A
KLV-26V300A
KLV-40V300A
KLV-26V300A
KLV-40V300A
KLV-26V300A
KLV-40V300A
KLV-32V300A
KLV-46V300A
KLV-32V300A
KLV-46V300A
KLV-32V300A
KLV-46V300A
KLV-32V300A
KLV-46V300A

Monday, November 9, 2015

Panasonic LCD th-P32D25D, th-P32D25E Service Mannual

Panasonic LCD th-P32D25D, th-P32D25E Service Mannual

Panasonic LCD th-P32D25D, th-P32D25E Service Mannual

https://www.dropbox.com/s/he09zmpnn5sq56n/panasonic_th-p42c10d_th-p42c10k_th-p42c10m_th-p42c10s_th-p42c10t_chassis_gph12da.pdf?dl=1

or

https://dl-web.dropbox.com/get/circuits/panasonic_th-p42c10d_th-p42c10k_th-p42c10m_th-p42c10s_th-p42c10t_chassis_gph12da.pdf?w=AABtU9LL3SbNVrJv-pMV04FHz-fj0rv2cZ5ZKmvxR24y7w&dl=1&_subject_uid=177367460

Panasonic th-p42c10d ,th-p42c10k, th-p42c10m , th-p42c10s th-p42c10t Blink Code

Panasonic th-p42c10d ,th-p42c10k, th-p42c10m , th-p42c10s th-p42c10t
chassis_gph12da

Blink Codes Chart
Panasonic Plasma

p42c10d
p42c10k
p42c10m
p42c10s
p42c10t

Saturday, November 7, 2015

Sony Klv-32v400a Blink chart

Sony Klv-32v400a LED Blinking Chart

Sony Klv-32v400a LED Blinking Chart

Tuesday, October 20, 2015

Sony KDL 32ex600, 40ex600, 46ex600 LED blinking chart

Sony KDL 32ex600, 40ex600, 46ex600 LED blinking chart

Sony KDL 32ex600, 40ex600, 46ex600 LED blinking chart

Sony Klv-24r402 service manual, schematic diagram

Sony Klv-24r402 service manual, schematic diagram

Download schematic diagram of Sony Klv-24r402 to below given link

https://www.dropbox.com/s/bgvjog4yft8sj91/sony_klv-24r402a.pdf?dl=1

or

https://drive.google.com/uc?export=download&id=0B62L9sW7H_wsN2lpR2ZWaUJtcW8

Monday, October 19, 2015

Sony Klv-24r402a Blink Chart

Sony Klv-24r402a Blink Chart

Sony Klv-24r402a Blink Chart

Monday, October 12, 2015

KLV-26,32,37,40BX320,321,323,325,420,421,423,425 Blink LED

KLV-26,32,37,40BX320,321,323,325,420,421,423,425
Led blinking

Friday, July 31, 2015

VideoCon Lcd Software

Videocon lcd software update:

VJK32HF-ZMK

Software update: Go to service menu-> contrast-> press 9735
Entered in factory menu/

GO to usb update and select OK;

Please Download VIdeocon lcd software from below give link:

https://dl.dropboxusercontent.com/content_link/LXyyzTc5OMJhhcsgsN2ikkIB2QU3qvCoM5cRtccoR141dRjAtbcQXspGmEkPcaLV?dl=1

or

https://www.dropbox.com/s/m4l8s7rujlen1wn/Software_TCL-F3380_VJK32_VID.rar?dl=1

Thursday, July 23, 2015

Samsung LCD Full HD LVDS Configuration

Samsung LCD Full HD LVDS Configuration

AUO Panel Full HD LVDS Configuration

Wednesday, July 8, 2015

SONY KDL-32/37/40/46EX402 LED Flashing, LED BLink Chart

SONY KDL-32/37/40/46EX402 LED Flashing, LED BLink Chart

Tuesday, June 30, 2015

PanasoncTH-37PV8P TH-37PX8B TH-42PV8P TH-42PX8B 42PX8E Blink Code for all

PANASONIC_TH-37PV8P_TH-37PX8B_TH-42PV8P_TH-42PX8B_TH-42PX8E_CHASSIS_GPH11DE
Blink Code

PanasoncTH-37PV8P TH-37PX8B TH-42PV8P TH-42PX8B 42PX8E Blink Code for all

Saturday, June 20, 2015

Sony 26, 32, 40 NX400, 26, 32, 40 NX500 LED Blink codes

Sony 26NX400, 32NX400, 40NX400 Led Blinking Chart

Sony 26NX500, 32NX500, 40NX500 Led Blinking Chart

Sony Standby Led Blinking for 26NX400, 32NX400, 40NX400 Led Blinking Chart

Sony Standby Led Blinking for 26NX500, 32NX500, 40NX500 Led Blinking Chart

Saturday, June 13, 2015

sony klv 22t550a, klv-32t550a Led Blink codes

Sony klv 22t550a,
klv-32t550a Led Blink codes

Sony klv 22t550a, 32t550a Led Blinking Chart
Sony Standby Led Blinking for klv 22t550a, 32t550a Led Blinking Chart

Sunday, June 7, 2015

Sony kdl-32ex710, 40ex710, 46ex710, 55ex710, 55ex711, 55ex713 Led Blinking Chart

Sony kdl-32ex710, 40ex710, 46ex710, 55ex710, 55ex711, 55ex713 Led Blinking Chart
Sony Standby Led Blinking for kdl-32ex710, 40ex710, 46ex710, 55ex710, 55ex711, 55ex713 Led Blinking Chart

Saturday, June 6, 2015

Pioneer plasma service mode, factory mode 3rd,4th,5th,6th, 7th generation Plasma Models:

ENTER SERVICE MODE TO PIONEER PLASMA TVs

Pioneer plasma 3rd,4th,5th,6th, 7th generation Models:

Factory mode, Service Mode

Plasma Pioneer 3rd Generation Models procedure:

Make sure the set is in standby
Hold down INPUT + VOL+ buttons on the panel.
Turn on the Plasma Pioneer at the panel.
The service menu will come up.

Plasma 4th, 5th, 6th & 7th generation models:

Make sure the Plasma and the Media Box are in standby.
Using the remote control, Press DISPLAY button (only press, do not hold) and wait 5 seconds.
Press {LEFT + UP + LEFT + RIGHT + POWER buttons.
The Pioneer Plasma will turn on and be in the service menu.

Wednesday, June 3, 2015

Samsung Lcd ,Led tv Factory mode ,Service mode

Samsung Lcd ,Led tv Factory mode ,Service mode

Method 1:

step1. Goto standby mode (power off).

step 2. press the {INFO} {MENU} {MUTE} {POWER} buttons on the remote.

if INFO is not in remote then
press the {Display} {MENU} {MUTE} {POWER} buttons on the remote.

The TV will turn On with the Service Menu displayed.
* Press the {POWER} button to exit the Service Menu.

or

Method 2:

In quick sequence on the remote press:
{MUTE} {1} {8} {2} {POWER} buttons.

# The TV will turn On with the Service Menu displayed.
ADJUSTMENT - TEST PATTERN - SET OPTION BYTE - FACTORY RESET

# Select the function and use the {VOL+} button to enter.
# Save settings and exit by pushing {MUTE} twice then {POWER}.